Power Hauler Alaskan Model HD923
Power Hauler, HD923, 2.3 HP / 90:1
With FREE Shipping in U.S.A. Includes Four FREE Magnum Shrimp Lights valued at $87.80 Price includes Washington State Sales Tax.
This is our recreational / light commercial pot pulling system. Equipped with our heavy duty 2.3 hp 12 volt worm gear power drive with our zero maintenance sealed oil bath roller bearing gearbox. With it's 90:1 gear ratio this power drive has a higher torque (pulling power) pulling 200 Lbs. at up to 120 feet per minute.
Manufactured with our exclusive Power Grip* self gripping rope sheave the Power Hauler smoothly and powerfully grips the rope with little effort for a virtually hands free operation.
- Power Hauler HD923 Includes:Heavy duty polished schedule 80 aluminum tubing and 1/4 inch motor plate.
- UHMW fairlead roller.
- 1/4 in. pulley block bracket.
- Heavy duty low resistance 6 gauge easy flex wire harness with an auto resetting breaker.
- Folbe open face chain link pulley block with a clevis shackle for mounting.
- Molded fiberglass waterproof switch box.
- Large front facing easy to operate power switch.
- Custom handmade fiberglass motor cover protects while maintaining a professional look.
- 3/8 stainless wire lock hitch pin to lock the davit into fishing/stowed positions
- Aluminum davit end cap.
- Premium UHMW sleeved gunnel mount and your choice of our sleeved flat or combo base mounts.
- Other mounts available.
200 Lbs. pulling capacity. *Patent Pending
Both a premium UHMW sleeved gunnel (upper) mount and a UHMW sleeved base mount (floor) are included.
However, you have a choice between two styles of base mounts depending on your need.
If unsure we suggest the combo mount since it provides more options in mounting. We also carry non-standard brackets and also manufacture custom mounting brackets. Please contact us for more information. See mounting brackets section for more images and descriptions.
Please select which base mount you prefer: Sleeved Flat Floor Mount or Sleeved combo floor wall mount. Please choose your mount in comments during order process.
On Sale
On Sale
Power Hauler HD923EX 2.3 HP Power Up & Down
Please note: Price includes free shipping & includes Washington State Sales Tax. Price also includes 4 free Magnum Shrimp Pot Lights valued at $87.50
This Power Hauler HD923EX offers a 90:1 power up and power down. The reversing power system allows the Power Hauler to either pull gear and equipment up or provide a controlled powered down. Manufactured with our exclusive Power Grip* self gripping rope sheave the Power Hauler smoothly and powerfully grips the rope with little effort for a virtually hands free operation.
Equipped with our heavy duty 2.3 hp 12 volt worm gear power drive with our zero maintenance sealed oil bath roller bearing gearbox. With its 90:1 gear ratio this power drive has a higher torque (pulling power) pulling 200 Lbs. at up to 120 feet per minute.
Note: Speed is the same for both up and down to reduce speed a block and tackle or similar setup is required. Additionally, the power switch is spring loaded which requires constant hand pressure while raising or lowering gear.
Power Hauler HD923EX Includes:
- Heavy duty polished schedule 80 aluminum tubing and 1/4 inch motor plate.
- UHMW fairlead roller.
- 1/4 in. pulley block bracket.
- Heavy duty low resistance 6 gauge easy flex wire harness with an auto resetting breaker.
- Folbe open face chain-link pulley block with a clevis shackle for mounting.
- Waterproof switch box.
- Momentary spring to off power switch.
- Custom handmade fiberglass motor cover protects while maintaining a professional look.
- 3/8 stainless wire lock hitch pin to lock the davit into fishing/stowed positions
- Aluminum davit end cap.
- Premium UHMW sleeved gunnel mount and your choice of our sleeved flat or combo base mounts.
- 4 Free Magnum LED Shrimp Pot Lights
200 Lbs. pulling capacity.
Price: $ 1,900.00 includes shipping & tax
Both a premium UHMW sleeved gunnel (upper) mount and a UHMW sleeved base mount (floor) are included.
However, you have a choice between two styles base mounts depending on your need.
If unsure we suggest the combo mount since it provides more options in mounting. We also carry non-standard brackets and also manufacture custom mounting brackets. Please contact us for more information. See mounting brackets section for more images and descriptions.
Please select which base mount you prefer in your comments during checkout
On Sale
On Sale
Power Hauler HD923 Power Reel System, With FREE Shipping in U.S.A. Includes Four FREE Magnum Shrimp Lights valued at $87.80 Price includes Washington State Sales Tax.
The HD923 Power Reel system will both deploy and retrieve your gear eliminating the need to hand coil or deploy the line. When retrieving gear the Power Reel drive pin is set to engage the drive shaft to wind the line onto the Power Reel. When deploying gear the Power Reel is reversed on the drive shaft which allows the Power Reel to spin freely to release the line as the gear sinks to the bottom.
Power Reels have an approximate capacity of 200 feet of 5/16 in., 300 feet of 1/4 in., or 500 ft of 3/16 in. (such as Sampson Tenex sinking line) which would take up less the 1 square foot of deck space stacked. This means that if six Power Reels with 200 ft of line were stacked three high would total 1200 ft. of 5/16 or 1,800 ft. of 1/4 of line and use less than 2 square feet of deck space.
Additional Power Reels are located in the Online Store Accessories section.
Having both power up and down control the HD923 Power Reel system is equipped with our heavy duty 2.3 hp 12 volt worm gear power drive and zero maintenance sealed oil bath roller bearing gearbox. The power drive has a 90:1 gear ratio for higher torque (pulling power) which pulls up to 120 feet per minute.
Checkout the Power Reel video in the video gallery of our website
Power Hauler Power Reel Includes :
- High impact ABS Power Reel with 100 ft. of 5/16 sinking mainline.
- Unique locking drive shaft that secures the Power Reel when in use.
- Power up and down control with a momentary spring to off power switch.
- Heavy duty schedule 80 aluminum tubing and 1/4 inch motor plate.
- Low resistance 6 gauge easy flex wire harness with an auto resetting breaker.
- Folbe open face chain-link pulley block with a stainless quick link for mounting.
- Custom motor cover that protects while maintaining a professional look.
- 3/8 stainless wire lock hitch pin to lock the davit into fishing/stowed positions.
- 1/4 in. pulley block bracket.
- Aluminum davit end cap.
- Premium UHMW sleeved gunnel mount and your choice of our sleeved flat or combo base mounts.
- Other mounts available
150 Lbs. Pulling Capacity.
On Sale
On Sale
Power Hauler Anchor & Pot Puller HD923CW
Power Hauler anchor windlass and gear retrieval system.
Free Shipping Anywhere in USA. Price includes Washington State Tax
Equipped with a heavy duty 2.3hp 12 volt worm gear power drive with our zero maintenance sealed oil bath roller bearing gearbox. Its 60:1 gear ratio high torque power drive can pull at speeds up to 50 feet per minute with a max load of 300 lbs.
Our rope capstan is manufactured with our exclusive Power Grip technology for added traction and extra-long life. Add the optional schedule 80 aluminum davit kit and you now multi-purposed the HD923CW into a complete pot puller for pulling crab, shrimp, lobster pots, or other equipment.
The anchor windlass has a 2ft wire pigtail power harness with an additional extra-long 20ft power wire harness. The power harness is also equipped with our in-line Power Pole connector. Custom lengths are available.
Power Hauler HDCW Includes:
Heavy duty polished schedule 80 aluminum tubing and 1/4 inch motor plate.
Heavy duty low resistance 6 gauge easy flex wire harness with an auto resetting breaker.
Heavy duty waterproof switch and switch box.
Three piece design allows of fast install and removal from boat
Stainless steel wire lock hitch pins to lock the motor unit in place
Aluminum motor tube end cap.
Custom polyurethane protective motor cap.
6 by 8 inch motor base mount.
300 lbs. pulling capacity.
2 free Magnum Shrimp & Crab Pot LED Lights
Price: $ 995.00 Includes Free Shipping in USA
LED Magnum Shrimp & Crab Pot Light
Shrimp & crab are attracted to light. This high quality LED magnum light has a bright shrimp and crab attracting white light. The Magnum LED light has a heavy duty clip with swivel making it easy to attach to any shrimp or crab pot. This LED light takes two AA batteries and has a positive twist lock with silicone seal. This light won't leak as long as you full engage the twist lock. With batteries inserted simply fully twist the two halves of the light until it locks into place and the LED bulb turns on. The light will stay on for up to four days depending on the AA batteries and temperature of the water. After use rinse in freshwater, then fully dry before unlocking the twist lock.